Primex Wireless Inc. B2004Z100 Manuel D’Utilisation

Installation and Operation Overview

Smart-Sync Clocks are designed to provide ease of installation - requiring no end user configuration, simply take-out-of the box and

install. The only operation dependency is its connection to an available Smart-Sync Bluetooth Network.

A Smart-Sync Clock is equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component, that allows the clock to

establish a wireless connection to a Smart-Sync Bluetooth Network.

A Smart-Sync Clock is identified by a unique Smart-Sync Device ID, allowing each clock to receive its unique settings that are

managed in OneVue, and also authenticate and connect to a Smart-Sync Bluetooth Network.

A Smart-Sync Bridge is the only system device that connects to your facility’s Ethernet or Wi-Fi network. Upon its network

connection, it connects to a NTP Server to receive UTC time and checks-in to OneVue to send Smart-Sync Clock statuses and

download Smart-Sync devices update pending settings.

Before you begin installing Smart-Sync Clocks - installation requirements

Confirm the Smart-Sync Bridge, designated to support the clock installation area, has established a network connection to OneVue and

a NTP Server to obtain UTC time.

If a Smart-Sync Site Survey was completed, install a clocks at each designated location.

Note:

Start by installing Smart-Sync Clocks that are located closest to the Smart-Sync Bridge and then work outward. A Smart-Sync

Clock should always be first powered on at its designated installation location.