CipherLab Co. Ltd. 1664 Manuel D’Utilisation
2
Enter Setup
1664 Barcode Scanner
User Guide
GETTING FAMILIARIZED WITH 1664 AND 3610
INSTALLING THE BATTERY TO 1664
1) Hold the scanner face down in one hand, press the battery cover, and slide the
battery cover.
2) Remove the battery cover to the other hand.
3) Push battery lock to unlocked position.
3) Push battery lock to unlocked position.
4) Hold the scanner still and insert the battery into the battery compartment.
For 1664, install a rechargeable 3.7V/850mAh Li-ion battery into the battery
compartment.
5) Push battery lock to lock the battery firmly.
6) Replace the battery cover.
7) Hold down the [Power/Delete] key for about 2 seconds to turn on the scanner.
6) Replace the battery cover.
7) Hold down the [Power/Delete] key for about 2 seconds to turn on the scanner.
The scanner will respond with a long beep (high tone) and its LED indicator will
become solid red and go off quickly.