CipherLab Co. Ltd. 3656CRADLE Manuel D’Utilisation
226
Enter Setup
1560/1562 Series Barcode Scanner
User Guide
HOW TO UPGRADE
HOW TO UPGRADE
HOW TO UPGRADE
HOW TO UPGRADE 3656
3656
3656
3656 CRADLE
CRADLE
CRADLE
CRADLE FIRMWARE
FIRMWARE
FIRMWARE
FIRMWARE
UPGRADING
UPGRADING
UPGRADING
UPGRADING 3656
3656
3656
3656 CRADLE
CRADLE
CRADLE
CRADLE CPU FIRMWARE
CPU FIRMWARE
CPU FIRMWARE
CPU FIRMWARE
1)
Connect the interface cable, RS-232 or USB, between 3656 CRADLE and your
computer.
For USB Virtual COM, you may need to install its driver first!
2)
Connect the power supply cord from 3656 CRADLE to a proper power outlet.
3)
Refer to
3.1.1 Connect to
for the target scanner to connect to 3656 CRADLE.
Read the “Set Connection” label first, and then the “Serial Number” label. Both labels
can be located at the back of 3656 CRADLE.
can be located at the back of 3656 CRADLE.
4)
Read the following barcodes in sequence to configure the scanner to use RS-232 as
download interface.
Enter Setup
Activate 3656 CRADLE
RS-232
Update
Or, read the following barcodes in sequence to configure the scanner to use USB
Virtual COM as download interface.
Virtual COM as download interface.
Enter Setup
Activate 3656 CRADLE
USB Virtual COM
Update
5)
Read the following barcodes in sequence for 3656 CRADLE to enter the download
mode. The Communication LED on 3656 CRADLE will be flashing red to indicate it is
ready for downloading.
ready for downloading.