CipherLab Co. Ltd. 3656CRADLE Manuel D’Utilisation
18
Enter Setup
1560/1562 Series Barcode Scanner
User Guide
The example below shows how to save your settings as “User Default” so that you may
restore user defaults at a later time:
restore user defaults at a later time:
Steps
Steps
Steps
Steps Acti
Acti
Acti
Action
on
on
on
User Feedback if Successful
User Feedback if Successful
User Feedback if Successful
User Feedback if Successful
1
Power on the scanner…
The scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
(high tone) and its LED indicator will
become solid red and go off quickly.
2
Enter the Configuration Mode…
The scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will be flashing red.
(high-low tone repeats three times), and
its LED indicator will be flashing red.
3
Read a Setup barcode…
For example,
The scanner will respond with two beeps
(low-high tone) if reading a normal setup
barcode.
(low-high tone) if reading a normal setup
barcode.
4
Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
5
The scanner will automatically restart itself…
Same as for Power on the scanner.
*
When any configuration error occurs...
The scanner will respond with one long
beep (low tone).
beep (low tone).