HydroPoint data systems inc. WT008 Manuel D’Utilisation
Note:
If your controller is in Rain Pause and you need to either
increase or decrease the number of days before it resumes normal
irrigation, turn the Function Selector dial to “Rain Pause” and change
the number of days with the Lower Line dial.
irrigation, turn the Function Selector dial to “Rain Pause” and change
the number of days with the Lower Line dial.
If the rain switch is tripped, no stations will run.
If you have installed and activated a rain switch, the display will look
like this:
like this:
The upper line shows the current date and time.
The lower line shows that all programmed stations of the controller
are affected by the Rain Sensor and that there are no stations on in the
“Manual” mode.
are affected by the Rain Sensor and that there are no stations on in the
“Manual” mode.
Operating Manually
Manual operation allows you to immediately start irrigation of all
stations or single station(s). Manual operation is for a specified
number of minutes and will start immediately, whether or not the
current day is an allowed irrigation day. Only one station can be on at
a time when watering in “Manual.”
stations or single station(s). Manual operation is for a specified
number of minutes and will start immediately, whether or not the
current day is an allowed irrigation day. Only one station can be on at
a time when watering in “Manual.”
The steps to manually operating your controller are:
1.
Manual Water Specific Stations
This involves manually watering individual stations.
2.
Minutes
These are the minutes that manual operation will run.
3.
Manual Water All Stations
This involves manually watering all stations with the same run
time.
time.
Note:
Manual operation is useful to test your system to ensure
that all the sprinklers are working properly and are correctly
identified.
identified.
Mar 26 2004 08:45:23pm
STA ON Rain Switch MAN--
Using Special Features
67
The steps to use the Rain Pause feature are:
1.
Rain Pause
This turns off all stations of the controller.
2.
Days to Resume
This sets the number of days to Pause.
Rain Pause
Turn the Function Selector dial to “Rain Pause.”
The display will look like this:
Days to Resume
1.
1.
Turn the Lower Level dial to:
•
00 to 14 Days (Default Setting: 00).
No irrigation will occur until Rain Pause has counted down to zero;
irrigation will then resume for all stations on the next scheduled
Water Day.
irrigation will then resume for all stations on the next scheduled
Water Day.
Rain Pause has no effect on Manual operations. (As each day elapses,
this display will update to show the number of days remaining until
it will resume normal irrigation.)
this display will update to show the number of days remaining until
it will resume normal irrigation.)
2.
Turn the Function Selector dial to “RUN.” The display will look
like this:
like this:
The upper line shows the current date and time.
The lower line shows that all programmed stations of the
controller are in Rain Pause and that there are no stations on in
the “Manual” mode.
controller are in Rain Pause and that there are no stations on in
the “Manual” mode.
Mar 26 2004 08:45:23pm
STA ON Rain Pause MAN--
RAIN PAUSE ALL STATIONS
00 Days to Resume
Using Special Features
66