HydroPoint data systems inc. WT008 Manuel D’Utilisation
To cancel a “MANUAL WATER All Stations” entry, simply turn the
Lower Line dial to “0.0 Minutes.” The manual valve currently on will
stop irrigation, and no other manual valves will irrigate.
Lower Line dial to “0.0 Minutes.” The manual valve currently on will
stop irrigation, and no other manual valves will irrigate.
Note:
Manual watering will occur immediately regardless of what
other stations are on and will run concurrently with all other
programmed stations.
programmed stations.
Understanding Alerts
The “Alerts” feature provides status alerts for key functions of the
WeatherTRAK ET plus.
WeatherTRAK ET plus.
ALERTS covers issues related to ET Service Communication,
Electrical Status, Water Window Violations and Required Water Day
Warnings.
Electrical Status, Water Window Violations and Required Water Day
Warnings.
If any 1 or more status sections are in Alert Mode, then the 3rd line of
the display (on all screens, not just in “Alerts”) will read:
the display (on all screens, not just in “Alerts”) will read:
“Status: Warning See Alert.”
This will display until you fix the problem associated with each alert.
This will display until you fix the problem associated with each alert.
To fix Day alerts:
reset the available water days or day interval in the
month displayed in the alert.
To fix Electrical Short alerts:
repair the electrical system or
component that has caused the short. The alert will then go away on
the next irrigation run.
the next irrigation run.
To fix Water Window alerts:
expand the water window, reduce the
run times with the ADJUST feature, or allow more days to irrigate.
To fix Communication Alerts:
call Hydropoint Customer Service at
800-362-8774.
To see alerts:
Turn the Function Selector dial to “Alerts.”
Turn the Function Selector dial to “Alerts.”
Using Special Features
71
2.
The choices using the Lower Line dial are:
•
Specific Stations (Default Setting), and
•
All Stations.
3.
Turn the Upper Line dial.
The display will look like this:
The lower line of the display shows the default setting. Only
whole minutes are set.
whole minutes are set.
4.
Turn the Lower Line dial to the desired minutes for manual
operation. These include:
operation. These include:
•
00 to 99 (Default Setting: 00.0).
Manual irrigation starts immediately on Station 1. The display
will change to show the status of irrigation as in the example
below (time set for two minutes).
will change to show the status of irrigation as in the example
below (time set for two minutes).
There are 1.9 minutes remaining on Station 1. After Station 1 has
completed watering, Station 2 will go on for two minutes, then
Station 3, etc. to the last Station on the controller. When all
irrigation is finished, the screen will change to this:
completed watering, Station 2 will go on for two minutes, then
Station 3, etc. to the last Station on the controller. When all
irrigation is finished, the screen will change to this:
Note:
If the Function Selector dial is turned to the “OFF”
position, after one (1) second, the Manual mode stops. (This
prevents momentary interruption of any irrigation when rotating
the Function Selector dial through the “OFF” position.)
prevents momentary interruption of any irrigation when rotating
the Function Selector dial through the “OFF” position.)
MANUAL WATER ALL STATION
00.0 Minutes
MANUAL WATER ALL STATION
01.9 Minutes STA 01 ON
MANUAL WATER ALL STATION
00.00 Minutes
Using Special Features
70