KROHNE FMCW24G74T Manuel D’Utilisation
DESCRIPTION OF HART INTERFACE
9
113
OPTIWAVE 7400-24 C
www.krohne.com
12/2015 - 4004901901 - MA OPTIWAVE7400-24 R01 fr
9.7 Field Device Tool / Device Type Manager (FDT / DTM)
9.7.1 Installation
Before you operate the device, the Device Type Manager (Device DTM) must be installed in the
Field Device Tool Container. This .msi file is given on the DVD-ROM supplied with the device. You
can also download the file from our website. For installation and configuration data, refer to the
documentation that is supplied with the Device DTM on the DVD-ROM or in the "Downloads"
section of the website.
Field Device Tool Container. This .msi file is given on the DVD-ROM supplied with the device. You
can also download the file from our website. For installation and configuration data, refer to the
documentation that is supplied with the Device DTM on the DVD-ROM or in the "Downloads"
section of the website.
9.7.2 Operation
The DTM and the device's local display use almost the same procedures to operate the signal
converter. For more data, refer to
converter. For more data, refer to
Operation
on page 54.
9.8 HART
®
menu tree for Basic-DD
Abbreviations of the following tables:
•
Opt
Optional, depending on device version and configuration
•
Rd
Read only
9.8.1 Overview Basic-DD menu tree (positions in menu tree)
9.8.2 Basic-DD menu tree (details for settings)
1 Measurements
1 Measurements
2 Output
2 Configuration and Test
1 Info.
1 Identification
2 Output
2 Supervisor
1 Test
2 Basic Parameters
3 Signal Out
4 Application
5 Display
6 Conversion Table
7 Reset
3 Diag/Service
1 Status
1 Standard Status
2 Device-specific Status
4 Access Rights
1 Access level
2 Method Login
3 Method entry Code
5 HART variables
1 Measurements
1 Measurements
1 Level value
Rd
/ 2 Distance value
Rd
/ 3 Volume value
Rd
/ 4 Ullage value
Rd
/ 5 Reflection
value
Rd