KROHNE FMCW24G74T ユーザーズマニュアル

DESCRIPTION OF HART INTERFACE

113

OPTIWAVE 7400-24 C

www.krohne.com

12/2015 - 4004901901 - MA OPTIWAVE7400-24 R01 fr

9.7 Field Device Tool / Device Type Manager (FDT / DTM)

9.7.1 Installation

Before you operate the device, the Device Type Manager (Device DTM) must be installed in the
Field Device Tool Container. This .msi file is given on the DVD-ROM supplied with the device. You
can also download the file from our website. For installation and configuration data, refer to the
documentation that is supplied with the Device DTM on the DVD-ROM or in the "Downloads"
section of the website.

9.7.2 Operation

The DTM and the device's local display use almost the same procedures to operate the signal
converter. For more data, refer to

Operation

on page 54.

9.8 HART

menu tree for Basic-DD

Abbreviations of the following tables:

•

Opt

Optional, depending on device version and configuration

•

Read only

9.8.1 Overview Basic-DD menu tree (positions in menu tree)

9.8.2 Basic-DD menu tree (details for settings)

1 Measurements

2 Output

2 Configuration and Test

1 Info.

1 Identification

2 Output

2 Supervisor

1 Test

2 Basic Parameters

3 Signal Out

4 Application

5 Display

6 Conversion Table

7 Reset

3 Diag/Service

1 Status

1 Standard Status

2 Device-specific Status

4 Access Rights

1 Access level

2 Method Login

3 Method entry Code

5 HART variables

1 Measurements

1 Level value

/ 2 Distance value

/ 3 Volume value

/ 4 Ullage value

/ 5 Reflection

value