Cardo Systems AWHS01 Manuel D’Utilisation

Low Battery

allways™ is in pairing mode

allways™ is paired to a mobile phone. Same
indication is shown even if the other device is
turned off.

allways™ is being charged and battery is not
yet fully charged.

allways™ is connected to charger and battery
is fully charged.

Every depression of the Control button will
generate a brief sound to be heard on the
Headset.Every increase/decrease on the volume
button is followed by a short beep. If volume can
not be further increased/ decreased, no beeps will
be heard.

Indicates that Headset is being turned on
Indicates that Headset is being turned off

Two beeps are sounded when activating
Mute/Set option, i.e. the other party will not
hear you until you cancel Mute/Set.

The mobile phone releases ringing tones which
are transferred to the Headset. Different ringing
tones will be heard subject to the model and
setting of the mobile phone.

While performing voice dialing, the phone
prompts you by means of a sound, indicating
that you ought to pronounce the name of party
you wish to call. Please refer to your mobile
phone manual for more information.

™

Light indicator blinks red and blue
(every 3-5 seconds)

Light indicator flashes rapidly in blue

Light indicator flashes slowly in blue

Light indicator shows steady red

Light indicator shows steady blue

Audio Signals from the Headset

Increasing tones
Decreasing tones

Two short beeps

Ringing tones

Other audio tones

18  †Headset Manual