Cardo Systems AWHS01 Manuel D’Utilisation
the BT Adapter was turned off), then you
should perform the following procedure
in the exact sequence as described:
Initially both devices should be turned off
• First: Turn on your allways
should perform the following procedure
in the exact sequence as described:
Initially both devices should be turned off
• First: Turn on your allways
™
Headset.
• Second: Turn on your allways
™
BT
Adapter.
• Wait up to 20 seconds.
• Once the units have re-established
connection, your allways
• Wait up to 20 seconds.
• Once the units have re-established
connection, your allways
™
BT Adapter
will start blinking in blue every 5 seconds
(slow blinking). If the procedure has failed,
the BT Adapter will start blinking in red.
In such case, please turn off both devices
and perform the procedure again.
(slow blinking). If the procedure has failed,
the BT Adapter will start blinking in red.
In such case, please turn off both devices
and perform the procedure again.
Connecting and setting the BT Adapter
to work with your Mobile Phone
Connect the allways
to work with your Mobile Phone
Connect the allways
™
BT Adapter to your
mobile phone by inserting the jack of the
Adapter’s cord into the appropriate audio
socket of your mobile phone. The cord’s
2.5 mm jack fits the sockets of most
mobile phones. However, if your mobile
phone uses a different socket, you will
have to purchase a suitable mechanical
Audio Connector. Such Audio Connectors
can either be ordered directly from Cardo
Systems, Inc. or be purchased at
appropriate retail stores (FIG b).
Adapter’s cord into the appropriate audio
socket of your mobile phone. The cord’s
2.5 mm jack fits the sockets of most
mobile phones. However, if your mobile
phone uses a different socket, you will
have to purchase a suitable mechanical
Audio Connector. Such Audio Connectors
can either be ordered directly from Cardo
Systems, Inc. or be purchased at
appropriate retail stores (FIG b).
To obtain a reference list of vendors or to
order online, please visit:
http://www.allwayscardo.com/purchase
order online, please visit:
http://www.allwayscardo.com/purchase
Note: Your BT Adapter can be configured
to work with almost every mobile phone
in the market. Its default configuration is
set to make it work with virtually all types
of mobile phones except for certain
NOKIA™ phones.
in the market. Its default configuration is
set to make it work with virtually all types
of mobile phones except for certain
NOKIA™ phones.
Important: It is imperative that you first
turn on the Adapter, then connect the
audio cable to the audio connector and
only thereafter insert the connector into
the mobile phone. If you do not follow
this sequence of steps, your setup is likely
to fail. If you have a Nokia model from
among the 51xx/61xx/62xx/63xx line, you
will require a 2.5 mm Audio Connector.
The male part of the Audio Connector
should be inserted into the socket of the
mobile phone, while the jack of the
Adapter is inserted into the Audio
Connector’s socket.
turn on the Adapter, then connect the
audio cable to the audio connector and
only thereafter insert the connector into
the mobile phone. If you do not follow
this sequence of steps, your setup is likely
to fail. If you have a Nokia model from
among the 51xx/61xx/62xx/63xx line, you
will require a 2.5 mm Audio Connector.
The male part of the Audio Connector
should be inserted into the socket of the
mobile phone, while the jack of the
Adapter is inserted into the Audio
Connector’s socket.
Note: For all Nokia models above you
need to press and hold the Mute/Set
button on the BT Adapter for 5 seconds
until red light Indicattor starts flashing in
once. To toggle between Nokia mode and
all other modes, press and hold the
Mute/Set button on the BT Adapter for 5
seconds. Thereafter the red light indicator
will flash once indicating that your device
in now in Nokia mode; two red flashes
indicate that you are set in the mode
suitable for other mobile phones.
need to press and hold the Mute/Set
button on the BT Adapter for 5 seconds
until red light Indicattor starts flashing in
once. To toggle between Nokia mode and
all other modes, press and hold the
Mute/Set button on the BT Adapter for 5
seconds. Thereafter the red light indicator
will flash once indicating that your device
in now in Nokia mode; two red flashes
indicate that you are set in the mode
suitable for other mobile phones.
20 †Headset Manual
Adapter