Cardo Systems AWHS01 Manuel D’Utilisation

™

Receiving and placing calls
Two options for answering and placing
calls are supported by the allways

™

 BT

Adapter and Headset: Normal mode and

Advanced mode. The default mode of
your Headset and BT Adapter is the
Normal mode, and handling of all calls

will be conducted as described below in
Section 9.1. For selected mobile phone
models, the Advanced mode can be set
(see more details in the Advance mode
section). If you are using the 2.5mm audio
Audio Connector for Nokia phones and
you have already set your BT Adapter as
described in chapter 8, your BT Adapter
is set to Advanced mode, and handling
of all calls will be conducted as described
below in Section 9.2.

9.1   Normal Mode
Each time you wish to use the Headset
you need to “connect” it to the mobile
phone by pressing briefly the CTRL button
on the Headset. To terminate the
connection  you need to disconnect the
link by pressing again the CTRL button.
To answer calls, end calls, or perform voice
dialing, use the keypad of your phone.

Answering a Call
While the mobile phone is ringing, press
once the Headset's CTRL button to create
a link between the Headset and the mobile
BT Adapter. You should now hear the
ringing tone on the Headset. To answer
the call, press the appropriate SEND or
Talk button of your mobile phone.

Placing a Call
While the phone is not ringing and no
call is in progress, press once the Headset’s
CTRL button to create a link between
Headset and BT Adapter. Dial the desired

Headset Manual   21