SendFar Technology Co. Ltd. OAB-03001 Manuel D’Utilisation
- Apply the New Settings
After that, click FINISH at the bottom of this page to complete the
modification of this page.
modification of this page.
1. Click
Utility > Administration, select the Save then Restart to apply
the new configuration settings.
2.4.5 Set Wireless Encryption for Wireless Interface
2. Click
FINISH. To take effect the previous configuration changes.
The SF-3000 supports 64-bit and 128-bit encryption:
Hint: It takes about 10 seconds, to complete the restart process.
For 64-bit encryption, an encryption key is 10 hexadecimal characters (0-9
and A-F) or 5 ASCII characters.
2.4.7 Upgrade the Firmware
For 128-bit encryption, an encryption key is 26 hexadecimal characters or
13 ASCII characters.
13 ASCII characters.
- Setup your TFTP Server
The Trivial File Transfer Protocal (TFTP) Server allows you to transfer files
across a network. You can download the firmware files for SF-3000
upgrades.
The Trivial File Transfer Protocal (TFTP) Server allows you to transfer files
across a network. You can download the firmware files for SF-3000
upgrades.
Modify the WEP encryption parameters on the web page “/General
Config/Woreless/”, Enter 1~15 characters into the WEP Key field, and
then click KeyGen to generate the WEP64 or WEP128 key patterns.
After the TFTP Server is installed, make sure you have the proper TFTP
Server IP address, the proper SF-3000’s firmware files, and that the TFTP
Server is operational.
Server IP address, the proper SF-3000’s firmware files, and that the TFTP
Server is operational.
2.4.6 Change Supervisor Account & Password
- Update the Firmware using the TFTP method
Click Utility > Administration. The following figure shows the Utility/
Administration page.
Administration page.
1. Click
Utility, select Software Upgrade page as shown in following
figure, and then you can use TFTP to upgrade your SF-3000. In here,
you must specify the TFTP server IP and select which file you want to
upgrade it (Program image, Web image), then click OK button to start
the TFTP upgrade process.
you must specify the TFTP server IP and select which file you want to
upgrade it (Program image, Web image), then click OK button to start
the TFTP upgrade process.
2. If the upgrade process is success, the SF-3000 will apply the new
settings and start rebooting right away.
Hint: You must set up a TFTP Server and this server must contain the
latest new image files.
latest new image files.
Version 1.00
Change the supervisor’s user name & password in the Supervisor Account
field, and click FINISH. To take effect the previous configuration changes.
field, and click FINISH. To take effect the previous configuration changes.
- Supervisor Account
12
Version 1.00
13