SendFar Technology Co. Ltd. OAB-03001 Manuel D’Utilisation

Press “Esc” keystroke to reboot the SF-3000 and during the boot process,
press “x”, then it will display prompt character NetARM> as shown in
following figure:

- Upgrade the Firmware using RS-232 console

Please refer to 2.5.3, it will introduce how to use RS-232 console in

- Identify the IP Address assigned to the unit.

Press “h” keystroke, it will display related commands as shown in following
figure:

If the connection is ok, when the SF-3000 is powered up, the “Current
Network Status” will be displayed as shown in following:

Version 1.00