SendFar Technology Co. Ltd. OAB-04004 Manuel D’Utilisation

„

The Host Name is not an essential setting, but it helps to identify the device
in network.  Use this setting to assign a name to the device.

„

Use this setting to assign or change the SF-3000 IP address.

„

Enter an IP subnet mask to identify the sub network so the IP address can
be recognized on the LAN.

„

Enter the default Gateway IP Address.

„

Enter the Primary/Secondary DNS Server IP Address, and click FINISH at
the bottom of this page to complete the modification of this page.

The SF-3000 supports 64-bit and 128-bit WEP encryption.

For 64-bit WEP encryption, an encryption key is 10 hexadecimal characters
(0-9 and A-F) or 5 ASCII characters.

For 128-bit WEP encryption, an encryption key is 26 hexadecimal
characters or 13 ASCII characters.

Modify the WEP encryption parameters on the web page “/General
Config/Woreless/”. Enter 1~15 characters into the WEP Key field, and
click KeyGen to generate the WEP64 or WEP128 key patterns.

Enter the Utility > Administration page. The figure below shows the
Utility/ Administration page.

„

Change the supervisor’s user name and password in the Supervisor
Account field, and click FINISH to take effect on the previous configuration
changes.