SendFar Technology Co. Ltd. OAP-02002 Manuel D’Utilisation
24
4.3.1 G
eneral DHCP
Server Parameter
- Trigger DHCP Service.
Select Enable to allow the OAP to assign
IP Addresses from IP Pool Table. Select Disable to prevent IP Address
assignment from the OAP
assignment from the OAP
- Default Gateway. Enter the default Gateway IP Address.
- Subnet Mask. Configure the subnet for the client.
- Name Server 1, 2, 3. Configure the DNS servers IP for the client.
- DHCP Start IP address. Enter the starting IP Address for this IP Pool
Table.
Table.
- DHCP End IP address. Enter the ending IP Address for this IP Pool
Table.
Table.
- Apply Interface. Enable DHCP server service on Wireless or Ethernet
interface.
interface.
4.3.2 Fixed Host Entries
Figure 4-5 shows the general DHCP parameters and the fixed host entry
table. (Default fixed host entry pool is empty).
table. (Default fixed host entry pool is empty).
1. Click Add . The Fixed Host Entry Edit page Figure 4-6 appears.
2. To edit the Fixed Host Entry, specify the Ethernet and Internet Address
fields.
- Ethernet Address. Enter the MAC address for a fixed IP user.
- Internet Address. Assign a fixed IP Address to this special user.
3. Click OK . The Fixed Host Entry Table appears with the entries list.
4. To modify or delete a fixed host entry, click the select button beside the
entry index number and click Modify or Delete .
25
5. To add another entry to the Fixed Host Mapping Pool, repeat step 1
through step 3.
6. When you have included all the entries you need, click FINISH .
Figure 4-6 Add Fixed Host Entry