SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
12
Remote Wireless Router-to-Central Wireless Bridge
1. Set the Central RB as a bridge (bridge IP address is 192.168.2.1).
2. Set Wireless parameters on Central RB: Channel (1) and SSID
2. Set Wireless parameters on Central RB: Channel (1) and SSID
(wireless).
3. Set the Remote RB as a Router (Wireless Interface IP is
192.168.2.2, Ethernet Interface IP is 192.168.10.1, must turn on NAT
on Wireless Interface and turn off NAT on Ethernet interface, default
route is 192.168.2.254).
on Wireless Interface and turn off NAT on Ethernet interface, default
route is 192.168.2.254).
4. Set Wireless parameters on Remote RB: Channel (1) and SSID
(wireless), these parameters must same with Central RB.
5. Set the DHCP server service on the Remote RB and apply it on
Ethernet Interface.
6. The Remote RB assign IP address to PC1 and PC2
13
Remote Wireless Bridge-to-Central Wireless Router
1. Set the Central RB run as a Wireless Router (Wireless Interface IP
is 192.168.1.1, Ethernet Interface IP is 192.168.2.1, must turn off NAT
on Wireless Interface and turn on NAT on Ethernet interface, default
route is 192.168.2.254).
on Wireless Interface and turn on NAT on Ethernet interface, default
route is 192.168.2.254).
2. Set Wireless parameters on Central RB: Channel (1) and SSID
(wireless)
3. Set the DHCP server service on the Central RB and apply it on
Wireless Interface.
4. Set the Remote RB as a Bridge (Bridge Interface IP is 192.168.1.2).
5. Set Wireless parameters on Remote RB: Channel (1) and SSID
5. Set Wireless parameters on Remote RB: Channel (1) and SSID
(wireless), these parameters must same with Central RB.
6. The Central RB assign IP address to PC1 and PC2
7. The operator can also turn off NAT behavior on Central RB and two
7. The operator can also turn off NAT behavior on Central RB and two
subnets are transparent.