SendFar Technology Co. Ltd. ORB-04002 Manuel D’Utilisation
14
Remote Wireless Router-to-Central Wireless Router
1. Set the Central RB run as a Wireless Router (Wireless Interface IP
is 192.168.1.1, Ethernet Interface IP is 192.168.2.1, default route is
192.168.2.254).
192.168.2.254).
2. Set Wireless parameters on Central RB: Channel (1) and SSID
(wireless).
3. Set the Remote RB as a Wireless Router (Wireless Interface IP is
192.168.1.2, Ethernet Interface IP is 192.168.10.1, default route is
192.168.1.1).
192.168.1.1).
4. Set Wireless parameters on Remote RB: Channel (1) and SSID
(wireless), these parameters must same with Central RB.
5. Set the DHCP server service on the Remote RB and apply it on
Ethernet Interface.
6. The Remote RB assigns IP address to PC1 and PC2.
The operator can also turn off NAT behavior on Central RB and turn on
NAT behavior on Remote RB. Any outgoing packets will transfer to
192.168.1.2
l Central RB: turn off NAT on Wireless Interface and turn off NAT
NAT behavior on Remote RB. Any outgoing packets will transfer to
192.168.1.2
l Central RB: turn off NAT on Wireless Interface and turn off NAT
on Ethernet interface.
l Remote RB: turn on NAT on Wireless Interface and turn off NAT
on Ethernet interface.
The operator can also turn on NAT behavior on Central RB and turn on
NAT behavior on Remote RB.
l Central RB: turn on NAT on Wireless Interface and turn on NAT
NAT behavior on Remote RB.
l Central RB: turn on NAT on Wireless Interface and turn on NAT
on Ethernet interface.
15
l Remote RB: turn on NAT on Wireless Interface and turn on NAT
on Ethernet interface.
2.2
Quick Setup
In this section, we only describe how to quickly configure the RB with
a web browser. For detailed descriptions of the many configuration
parameters and network configuration, refer to Chapter 3.
a web browser. For detailed descriptions of the many configuration
parameters and network configuration, refer to Chapter 3.
2.2.1 Configure Requirements
Before setup, we must install RB first
1. Connect power adaptor and power on the RB
1. Connect power adaptor and power on the RB
2. Connect the Ethernet cable for connecting the RB to the network
3. Connect a computer to the same network with this RB
4. Start your Microsoft Internet Explorer web browser program from a LAN-
attached computer. To access the web interface of the RB, you have to
disable Access the Internet using a proxy server function in View /
Internet Options / Connection as shown in Figure 2-2 or add the IP
address of the RB (default IP address is 192.168.2.1) to Bypass proxy
server for local addresses as shown in Figure 2-3.
disable Access the Internet using a proxy server function in View /
Internet Options / Connection as shown in Figure 2-2 or add the IP
address of the RB (default IP address is 192.168.2.1) to Bypass proxy
server for local addresses as shown in Figure 2-3.
5. Type the IP address and HTTP port of the RB (default IP address is
192.168.2.1) in the address field (http://192.168.2.1:2000/) and press
Enter. Make sure that the IP addresses of RB and your computer are in
the same subnet.
Enter. Make sure that the IP addresses of RB and your computer are in
the same subnet.
6. After the connection is established, you will see the User Identification
Window as shown in Figure 2-4 Enter the proper User Name and
Password to see the web user interface of the RB. The default user
name and password is root and root, respectively.
Password to see the web user interface of the RB. The default user
name and password is root and root, respectively.