SendFar Technology Co. Ltd. WPC-02005 Manuel D’Utilisation

 

3

 

The infrastructure mode requires the use of an access point (AP). In this 
mode, all wireless communications between two computers have to be via 
the AP no matter the AP is wired to Ethernet network or stand-alone.  
If wired to an Ethernet network as shown in Figure 1-4, the AP serves as a 
bridge and provides the link between the server and the wireless clients. 
The wireless clients can move freely throughout the coverage area of the 
AP while remaining connected to the server. Since the AP is connected to 
the wired network, each client would have access to server resources as 
well as to other clients. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

4

 

This chapter describes how to install the PC Card drivers and client utility 
under Windows 95/98/ME/2000/XP. 

During the installation, Windows 98/ME/2000/XP may need to copy 
Windows systems files from the Windows 98/ME/2000/XP installation 
diskette or CD-ROM. Therefore you will need a copy of the Windows 
98/ME/2000/XP installation diskette or CD-ROM at hand before installing 
the driver. On many systems, instead of a CD, the necessary installation 
files are archived on the hard disk in C:\WINDOWS\OPTIONS\CABS 
directory. 

1.  Turn on your computer. 
2. Insert 

the 

Wireless LAN Driver CD into your CD-ROM drive. Run it by 

selecting RUN from the Start menu and running 
ISL3PRDSUIT_EXE_WIN__1_7_3.EXE or just double click the 
ISL3PRDSUIT_EXE_WIN__1_7_3.EXE from CD-ROM drive. 

3.  The setup information will shown as Figure 2-1. Follow the instructions 

as they appear.