SendFar Technology Co. Ltd. WPC-02005 Manuel D’Utilisation

 

7

 

9.  Make sure that the network protocol parameters are set correctly for 

your computer. These include the IP address, subnet mask, gateway 
and DNS. If you are unfamiliar with how to set network protocol 
parameters, refer to Chapter 3 Connection to Network for details. 

10.  Restart your computer for changes to take effect. 
 
Note 
1.  If your computer running Windows 95/98/ME/2000/NT installed 

Wireless LAN PC card and you would like to upgrade to Windows XP, 
you have to remove Wireless LAN PC card driver & utility from your 
computer in advance to let the Wireless LAN PC card work with 
Windows XP properly. 

2.  Please follow the procedure: click Start button, select Program, point 

to Wireless LAN PC Card, and then click Uninstaller to uninstall the 
driver and utility automatically 

3.  Once you finish removing the driver and utility, please refer to the 

above installation procedure for Windows XP. 

 
1. 

Insert the Wireless LAN PC Card into the PCMCIA slot and urn on 
your computer. 

2. Right-click 

on 

My Computer icon on the Windows desktop to choose 

Properties and the System Properties window will pop out. 

3. 

Click on the tab Device Manager and then move the mouse to 
Network Adapters node to expend the tree list by clicking on the plus 
sign. 

4. 

Remove Wireless LAN PC Card that you have installed already. 

5. 

Uninstall the Old Driver. 

6. 

You must remove the old existing driver before installing the new 
driver. 

7. Click 

Start icon on the tool bar and select Control Panel from setting 

item. 

8. 

Double click the Add/Remove Programs icon to open up 
Add/Remove Programs window then choose the tab Install/Uninstall, 
pick up the utility that you have installed for Wireless LAN PC Card 
and press the button Add/Remove. 

9. 

The dialog box will show up to confirm if you want to remove the driver 
and all of its components. Please click on OK button to complete the 
uninstall procedure of the old driver. 

10.  Restart the computer and remove the Wireless LAN PC Card. 
 

 

8

 

After installing the driver and utility, follow the steps below to check that 
the PC Card is operating correctly. 
1. Click 

the 

Start button, select Settings, and then click Control Panel. 

2. In 

the 

Control Panel window, double-click the System icon, then 

select the Device Manager tab. 

3. Double-click 

Network adapters, then select Wireless LAN PC CARD 

as shown in Figure 2-3 

 

 
 
4. Click 

the 

Properties button, then check the message. This device is 

working properly is displayed for Device status as shown in Figure 2-
4.