GN Otometrics A/S 1010 Manuel D’Utilisation
NOAHlink Users Manual
17
6.2 Installation
Follow the procedure below to install your NOAHlink:
Remove NOAHlink from its charger cradle (if you have
placed it there while charging the rechargeable battery)
Place your NOAHlink unit not more than five meters from
your PC in order to ensure adequate wireless
communication.
communication.
Turn on your NOAHlink.
Turn on your PC.
An installation CD is provided with your NOAHlink. Put
this into your disk drive. If the program does not begin
running straightaway, locate the Setup program under the
File menu and double-click on this option. The program will
then install a NOAHlink driver which connects the fitting
module running under NOAH to the Bluetooth device
communicating with your NOAHlink.
running straightaway, locate the Setup program under the
File menu and double-click on this option. The program will
then install a NOAHlink driver which connects the fitting
module running under NOAH to the Bluetooth device
communicating with your NOAHlink.
NOTE: If you have more than one NOAHlink unit, it is
recommended that you attach one of the name labels that
are included in your NOAHlink package to the back of
your NOAHlink and write a suitable name on this label,
for example, the location of the NOAHlink or the name of
its user. This allows you to differentiate between different
NOAHlinks. Refer to Section 8.1.1 for details on naming
your NOAHlink via your PC.
are included in your NOAHlink package to the back of
your NOAHlink and write a suitable name on this label,
for example, the location of the NOAHlink or the name of
its user. This allows you to differentiate between different
NOAHlinks. Refer to Section 8.1.1 for details on naming
your NOAHlink via your PC.