Broadcom Corporation BRCM1005-D Manuel D’Utilisation
Adding and Replacing Parts
165
FILE LOCATION: S:\SYSTEMS\Pebble\UG\A00\English\r_r.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 1 / 2 9 / 0 3 – F O R P R O O F O N LY
1
Connect the keyboard connector to the interface connector on the
system board.
2
Insert the five securing tabs on the keyboard into their respective slots
in the palm rest.
3
Replace the two screws at the top of the keyboard.
4
Replace the center control cover and snap it down so that it is flush
with the palm rest.
Adding a Mini PCI Card
If you ordered a Mini PCI card with your computer, the card is already
installed.
installed.
CAUTION: Before working inside your computer, read the safety
instructions in your
System Information Guide
.
1
Ensure that the work surface is flat and clean to prevent scratching the
computer cover.
2
Save and close any open files, exit any open programs, and then shut
down the computer.
3
If the computer is connected to a docking device (docked), undock it.
See the documentation that came with your docking device for
instructions.
4
Disconnect the computer from the electrical outlet.
5
Wait 10 to 20 seconds, and then disconnect any attached devices.
6
Remove any installed PC Cards and the battery.
NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts. Ground yourself by touching a metal connector on the back
of the computer. Continue to ground yourself periodically during this
procedure.
of the computer. Continue to ground yourself periodically during this
procedure.
7
8
If a Mini PCI card is not already installed, go to step 9. If you are
replacing a Mini PCI card, remove the existing card:
a
Disconnect the Mini PCI card from the attached cables.