Broadcom Corporation BRCM1020 Manuel D’Utilisation

146

Adding and Replacing Parts

FILE LOCATION:  C:\Projects\Spears\SpearsHTML\parts.fm

DELL CONFIDENTIAL – PRELIMINARY 7/18/07 - FOR PROOF ONLY

Replacing Memory Module

 

NOTICE: 

To avoid electrostatic discharge, ground yourself by using a wrist 

grounding strap or by periodically touching an unpainted metal surface (such as a 
connector on the back of the computer).

1 Align the notch in the module edge connector with the tab in the 

connector slot. 

2 Slide the module firmly into the slot at a 45-degree angle, and rotate the 

module down until it clicks into place. If you do not feel the click, remove 
the module and reinstall it.

 

NOTE: 

If the memory module is not installed properly, the computer may not boot. 

No error message indicates this failure.

1

securing clips (2)

2

memory module

1

2