Newcont Electronic Co. Ltd. 63201 Manuel D’Utilisation

2. NEW CALL/MSG(MESSAGE )WAITING LED  Indicator: Blinks when recording a new 

    incoming call or when receiving a Message Waiting signal, if you have subscribed  to a 

    Voice Mail message service from your local telephone company. (See page 11 ).

3. Large LCD Screen: Shows call information, phone status, prompts and directory items.

HANDSET Controls

4. TALK              Button: Press to answer an  incoming call or to place a call. Press to end 

    a call.

5. TEMPORARY TONE             Button:   Press to temporarily change the dialing  mode 

    from PULSE to TONE for rotary service users . (Press once before entering numbers to 

    access the  Answering System or electronic banking services, etc.)

6.            button:  Press to access names and numbers stored in the  DIRECTORY.

7. FUNC(FUNCTION)/VOICE MAIL            /VOICE MAIL Button:  (FUNCTION)- Press 

    and hold down to access Special functions operation in STANDBY mode. (For special 

    functions see page 19). (VOICE MAIL) - Press to automatically dial the Voice Mail Post 

    Code in your area to access your Voice Mail message in HANG-OFF mode. (Format) - 

    Press to change the format of the displayed number when reviewing the Caller ID list or 

    phone book.

8.             /FLASH button: (FLASH) Press to answer a call if you have Call  Waiting. 

      (EDIT) Press to edit listed items.  

9.  BATT LOW INDICATOR :Appears on the LCD Screen when the battery charge is low. 

      (See page 26 for detail)

10.                                    Button: Press to move around   the Large LCD Screen.

11. HANDSET Volume Control(hi,mid ,low) Switch: Select the receiver volume level

      (HI, MID, LOW).

12. HEADSET JACK:  For  connection  your  headset  plug  to  enjoy  hands-free  

      communication.(See page 10 for detail.)

13. TELEPHONE KEYPAD: Allows you to make a call depending on pressed button.

      (for TELEPHONE KEYPAD characters, see page 24.)

14.             

RE/PA Button: (SAVE )Press and hold down to save the changes on the listed 

       items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a 

       pause  while dialing. (You will need the            

RE/PA  button to dial  numbers which use

       an alternative Long Distance Access Code.)

button: (SCAN) Press to change the operating channel when you hear 

       interference. (DELETE) press and hold down to delete items or individual characters.

16.  CHARGE CONTACTS: For charging the BATTERY PACK inside the HANDSET. We 

       recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.

D

This  cordless  telephone  uses  radio  frequencies  to  allow  mobility. There are certain 
difficulties in using radio frequencies with a cordless telephone. While these are normal, 
the following could after operation of your system.

Electrical  pulse  noise  is  present  in  most  homes  at one time or another. This noise in 
most intense during electrical storms. Certain kinds of electrical  equipment such as light
dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio 
frequencies  are  susceptible  to  these  noise pulses, you may occasionally hear them in
your HANDSET. Generally  they are a minor annoyance and should not be interpreted as 
a defect in your  system.

Because radio frequency is used, location of the BASE UNIT can affect  operating range. 
Try several locations in your home or office  and pick the  one that gives you the clearest 
signal to the HANDSET.

Electronic circuits activate a relay to connect the cordless telephone to your telephone line.
These electronic circuits operate in the radio frequency spectrum. While several protection 
circuits   are  used  to  prevent  unwanted  signals,  there  may  be  periods  when  these 
unwanted  sign als  enter  the BASE UNIT.  You may hear clicks or hear the relay  activate 
while your are not using  the HANDSET. If interference occurs frequently, it can  be  mini-
mized  or eliminated by lowering the height of your BASE UNIT ANTENNA or by relocating
the BASE UNIT. You can check for interference before selecting the final BASE UNIT loca-
tion by plugging in the phone.

This  cordless  telephone  uses  radio  communication  between  the  HANDSET  and the 
BASE UNIT and may not ensure privacy of communication. Other devices, including other 
cordless  telephones,  may interference  with the operation of  this  cordless telephone or 
cause  noise  during  operation.  Units not containing  coded access may be accessed  by 
other radio communication systems. Cordless telephones must not cause  interference to 
any licensed radio service.

Technical Information

29

SAVE

SAVE

SAVE

SAVE

TALK