Newcont Electronic Co. Ltd. 63201 Manuel D’Utilisation

BASE UNIT CONTROLS

4. ANTENNA: Raise or reposition for the best reception.

5. IN USE/CHARGE LED Indicator: (IN USE) Lights up to indicate that the HANDSET

    is in TALK mode or an extension telephone is in use. (CHARGE) Lights up when the 

    HANDSET is placed on the BASE UNIT for charging.

6. PAGE            Button : Press to page the HANDSET.

7. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best 

    performance ,clean the CHARGE TERMINALS periodically with a damp cloth.

F

The BATTERY PACK provides power for the HANDSET of  your cordless telephone.

 1. Remove the

 BATTERY COMPARTMENT COVER by sliding it down.

 
2. Pull out the BATTERY CONNECTOR PLUG  and remove the BATTERY PACK.
 
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.
 
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its 
    closed position.
 
5. Before use, charge the new BATTERY PACK for 12 hours.

ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK.  The 
BATTERY PACK is recyclable. At the end of its useful life,  under various state and local
laws, it may be illegal to dispose of this BATTERY PACK into the municipal waste stream.
Check  with  your  local  solid  waste  officials for details in your area for recycling options
or proper disposal. 

Changing the Battery Pack

27

BATTERY

BATTERY PACK
     PLUG

      BATTERY 

COMPARTMENT

CONNECTOR

Remove the HANDSET BATTERY COMPARTMENT

COVER by sliding it down.

COVER

  

  

BATTERY PACK