Newcont Electronic Co. Ltd. NTP-6309 Manuel D’Utilisation

4. Use the dial pad to enter the three digit area code there your phone numbers 
    begins with.

5. Press and hold down the                      button.

6. Press the                           button to return to STANDBY mode.

    This unit enables you to select the standard FLASH TIME applicable to your calling
    area. If you are not sure of the FLASH TIME  you are using ,call your local telephone 
    company.
   1.Press the                           button and hold down. 
   2.Press the TELEPHONE KEYPAD            button.
   3.Press the                       button.
   4.Press the SCROLL UP          or DOWN          button to select the FLASH TIME.  The 
      preset  FLASH TIME is 600  milliseconds.
   5.Press and hold down the                     button.
   6.Press the                          button to return to STANDBY mode.
 

 

   This unit enables you to adjust the PAUSE TIME when placing a call using a
   switchboard system or dialing a Long Distance calls.

1. Press the                           button and hold down.

2. Press the TELEPHONE KEYPAD               button. 

3. Press the 

  button.

4. Press the SCROLL UP         OR DOWN         button to adjust the pausing time. The
    preset pause time is 3 seconds.

5. Press and hold down the                     button.

6. Press the                           button to return to STANDBY mode.

Caller ID System Operation

22

/RE/PA

/RE/PA

/RE/PA

/FLASH

/FLASH

3

   1. Read and understand all instructions.
   2. Follow all warnings and instructions marked on the telephone.
   3. Do not use this telephone near a bathtub, kitchen sink, wash bowl, laundry tub,
        in a wet basement, near a swimming pool, or anywhere else where there is water.
   4. Avoid using a telephone(other than a cordless type) during an electrical storm.
       There may be a remote risk of electric shock from lighting.
   5. Do not use the telephone to report a gas leak in the vicinity of the leak.
   6. Use only the power cord and BATTERY PACK indicated in the Owner's Manual.
       Do not dispose of the BATTERY PACK in a fire .The BATTERY PACK may explode .
       Check with local codes for possible special disposal instructions.
   7. Unplug this telephone from the wall outlet before cleaning or replacing 
       the BATTERY PACK. Do not use liquid cleaners or aerosol cleaners on the
       telephone. Use a damp cloth for cleaning. 
   8. Place this telephone on a stable surface. Serious damage and/or injury may result 
       if the telephone falls.
   9. Do not cover the slots and openings on this telephone. This telephone should never
       be placed near or over a radiator or heat register. This telephone should not be
       placed in a built-in installation unless proper ventilation is provided.
  10.Operate this telephone using the electrical voltage as stated on the BASE UNIT or 
       in the Owner's Manual .If you are not sure of the voltage in your home , consult your 
       dealer or local power company.
   11.Do not place anything on the power cord. Install the telephone where no one will 
        step or trip on the cord.
   12.Do not overload wall outlets or extension cords as this can increase the risk of fire 
        or  electric shock.
   13.Never push any objects through the slots in the telephone. They could touch 
        dangerous voltage points or short out parts that could result in a risk of fire or 
        electric shock. Never spill liquid of any kind on the telephone.
   14.To reduce the risk of electric shock, do not take this telephone apart. If service 
        or repair work is required on this telephone, take it to a qualified service
        representative. Opening or removing covers may expose you to dangerous voltage 
        or other risks. Incorrect reassembly can cause electric shock when the appliance is
        subsequently used.
15. Unplug this telephone from the wall outlet and consult a qualified service
       representative in any of the following situations:
       A. When the power supply cord is frayed or damaged.
       B. If liquid has been spilled into the telephone.
       C. If the telephone  has been exposed to rain or water.
       D. If the telephone does not operate normally by following the operating instructions. 
Adjust only those controls that are covered by the operating instructions. Improper 
adjustment  may  require extensive work by a qualified technician to restore the telephone 
to normal operation.

Safety Instructions