Vocera Communications AB3000 Manuel D’Utilisation

Blocking and Accepting Calls 

Until your voiceprint has been recorded, other users will be able to log in under
your name. Your system administrator may have configured the system to
prompt you to record your voiceprint the first time you log in.

To allow the system to authenticate you when you log in, use the following
commands to record or erase your voiceprint.

Record or erase
voiceprint *

Record my voiceprint.

Erase my voiceprint.

 

Make sure you record your voiceprint in a quiet place and speak in a normal
voice.

Important:  After you have recorded your voiceprint, you should test it several
times by logging in and out. If you have trouble logging in, you should erase
your voiceprint or ask your system administrator to erase it so you can log in
and re-record it. The system automatically refines your voiceprint over time; the
more times you log in successfully, the easier it is for the system to recognize
your voice the next time.

Blocking and Accepting Calls

You can use the following voice commands to block or accept calls. Some
of these commands offer more flexibility than the comprehensive blocking
provided by the Hold/DND button.

Block calls *

Block all calls.

Block all calls from John Smith.

Block all calls except from
John Smith.

Hold all calls.

Hold all calls from John
Smith.

Hold all calls except
from John Smith.

Accept calls *

Accept all calls.

Accept all calls from John
Smith.

Accept all calls except from
John Smith.

Take all calls.

Take all calls from John
Smith.

Take all calls except
from John Smith.