Vocera Communications B2000 Manuel D’Utilisation

18 ··· Vocera User Guide

Press the Call button to begin and end all voice communications, such 
as making calls, sending and listening to messages, and recording your 
name and greeting. The Call button also has these other uses:

• The Call button turns the badge on and off. Press and hold the Call 

button for at least 5 seconds to turn the badge power off. To turn 
the badge on, press the Call button again.

• If the Genie asks you a question that requires a yes or no response, 

you can press the Call button to answer “yes.”

• If you are on a call and you hear a Call Waiting tone, press the Call 

button to put the current call on hold and connect to the new call. 
To disconnect from the second call and return to the call on hold, 
press the Call button again.

The Hold/DND button places calls on hold and puts the badge in Do Not 
Disturb (DND) mode:

• To hold a call, press the Hold/DND button while the call is in 

progress. To release the hold, press the button again.

While a call is on hold, you can press the Call button to summon 
the Genie. When the Genie answers, you can call another user, 
check for new messages, or issue any other command. Once the 
command has been carried out and the operation is finished, the 
Genie automatically reconnects you with the person on hold.

• To put the badge in Do Not Disturb mode, press the Hold/DND but-

ton when no call is in progress. Callers are told that you are unavail-
able, and they are invited to leave a message, or else their call is 
forwarded to another destination if forwarding is active for your 
badge.

A small yellow indicator light on the Hold/DND button blinks when the 
badge is in Hold or Do Not Disturb mode.