Vocera Communications B3000N Manuel D’Utilisation
MAINTAINING YOUR BADGE
83
VOCERA BADGE USER GUIDE
Indicator
Meaning
Light off
There is no battery or badge in the charger, or the battery is
not seated properly.
Blinking green
The battery is charging.
Steady green
The battery is fully charged.
Red
The battery is unable to charge, or there is a problem with
the charger. If the charger works when you try to charge a
different battery, dispose of the original battery and charge a
new one.
Charging the Battery
Charging B3000n and B3000 Batteries
B3000n and B3000 batteries can only be charged after they have been removed from the badge.
They cannot be charged while they are attached to the badge. When you remove the battery, you
do not need to remove an attached lanyard or clip from the badge.
They cannot be charged while they are attached to the badge. When you remove the battery, you
do not need to remove an attached lanyard or clip from the badge.
To charge the B3000n or B3000 battery:
1. Use your thumb to press the battery latch and lift it up, and then remove the battery.
2. Insert the battery into the charger, and press down on the battery until you see the blue
indicator light turn on.
If battery capacity exceeds 80%, the blue indicator light will turn off after a second.
The green indicator light on the front of the charger will begin to blink when the battery is
positioned correctly, and it will continue to blink while the battery is charging. When the
indicator glows steadily, the battery is fully charged. Charging normally takes only a few hours.
positioned correctly, and it will continue to blink while the battery is charging. When the
indicator glows steadily, the battery is fully charged. Charging normally takes only a few hours.
3. Remove the battery from the charger.
4. Slide the pegs at the top of the battery into the two holes in the badge's battery
4. Slide the pegs at the top of the battery into the two holes in the badge's battery
compartment.