Gemalto M2M GmbH PLS8-USR3 Manuel D’Utilisation
Cinterion
®
PLS8-US R3 Hardware Interface Overview
8.2 Compliance with FCC and IC Rules and Regulations
38
PLS8-USR3_HIO_v03.012
2015-10-13
Confidential / Released
Page 37 of 41
8.2
Compliance with FCC and IC Rules and Regulations
The Equipment Authorization Certification for the Gemalto M2M modules reference application
described in
described in
will be registered under the following identifiers:
•
PLS8-US R3:
FCC Identifier QIPPLS8-USR3
Industry Canada Certification Number: 7830A-PLS8USR3
Granted to Gemalto M2M GmbH
FCC Identifier QIPPLS8-USR3
Industry Canada Certification Number: 7830A-PLS8USR3
Granted to Gemalto M2M GmbH
Manufacturers of mobile or fixed devices incorporating PLS8-US R3 modules are authorized
to use the FCC Grants and Industry Canada Certificates of the PLS8-US R3 modules for their
own final products according to the conditions referenced in these documents. In this case, the
FCC label of the module shall be visible from the outside, or the host device shall bear a second
label stating "Contains FCC ID: QIPPLS8-USR3" and accordingly “Contains IC: 7830A-
PLS8USR3“. The integration is limited to fixed or mobile categorised host devices, where a
separation distance between the antenna and any person of min. 20cm can be assured during
normal operating conditions.
to use the FCC Grants and Industry Canada Certificates of the PLS8-US R3 modules for their
own final products according to the conditions referenced in these documents. In this case, the
FCC label of the module shall be visible from the outside, or the host device shall bear a second
label stating "Contains FCC ID: QIPPLS8-USR3" and accordingly “Contains IC: 7830A-
PLS8USR3“. The integration is limited to fixed or mobile categorised host devices, where a
separation distance between the antenna and any person of min. 20cm can be assured during
normal operating conditions.
For mobile and fixed operation configurations the antenna gain, including cable loss, must not
exceed the limits listed in the following
exceed the limits listed in the following
for FCC and IC.
IMPORTANT:
Manufacturers of portable applications incorporating PLS8-US R3 modules are required to
have their final product certified and apply for their own FCC Grant and Industry Canada Cer-
tificate related to the specific portable mobile. This is mandatory to meet the SAR requirements
for portable mobiles (see
Manufacturers of portable applications incorporating PLS8-US R3 modules are required to
have their final product certified and apply for their own FCC Grant and Industry Canada Cer-
tificate related to the specific portable mobile. This is mandatory to meet the SAR requirements
for portable mobiles (see
for detail).
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
could void the user's authority to operate the equipment.
Table 10: Antenna gain limits for FCC and IC
Operating band
FCC limit
IC limit
Unit
Maximum gain in lower operating bands with f< 1GHz
(GSM850, WCDMA BdV, LTE Bd5 / Bd17
(GSM850, WCDMA BdV, LTE Bd5 / Bd17
3.25
0.63
dBi
Maximum gain in higher operating bands with f=1700MHz
(WCDMA BdIV, LTE Bd4)
(WCDMA BdIV, LTE Bd4)
5.5
5.5
dBi
Maximum gain in higher operating bands with f=1900MHz
(GSM1900, WCDMA BdII, LTE Band 2)
(GSM1900, WCDMA BdII, LTE Band 2)
2.51
2.51
dBi