Renishaw plc RMIV2 Manuel D’Utilisation

RMI visual diagnostics

Red

Error, other outputs may
be incorrect.

Off

No Error.

Green

Excellent communications.

Yellow

Good communications.

Red

Poor communications,

radio link may fail.

Off

No signal detected.

Green/off

Flashing: RMI is in

acquisition mode, and can

acquire a partner RMP.

Red/yellow

Flashing: RMI has (just)

acquired a new partner RMP.

1.

The probe status LED will always be

illuminated when power is present.

There is no ‘power present’ LED/light.

2.

All the indicators report the status of the

partner RMP60. If there is no partner in

range, or the partner is off then the probe

status and error LEDs will be red and the

other LEDs will be off.

3.

When the RMI is powered it will enter the

acquire partner mode which will be indicated

by the flashing green signal LED (no change

in outputs). After a short time (~12 secs) it

will switch to its normal mode listening for

its partner.

4.

The conditions shown by the low battery,

probe status and error LEDs are the same

as those present on the electrical signal

outputs.