Renishaw plc RMIV2 Manuel D’Utilisation

Probe status 2b (driven at power supply voltage):

Load current

50 mA max.

Output voltages

Sourcing (Voltage supply - Output voltage)

= 2.6 V max at 10 mA.

= 3.5 V max at 50 mA.

Sinking =

2.0 V max at 10 mA.

2.9 V max at 50 mA.

The Low Battery, Probe Status, and Error LEDs will

start flashing red when an output overload has occurred.

All outputs will be switched off. If this occurs, turn off the

power supply and remove the source of the problem.

Turning on the power supply will reset the RMI.

RMI outputs