Renishaw plc RMIV2 Manuel D’Utilisation

Do not exceed 30 V between the black wire and the screen wire (green/yellow), or the

red wire and screen wire (green/yellow), or the red and black wires (power supply), as

this could result in permanent damage to the RMI and/or the customer power supply.

The use of in-line fuses at the machine cabinet end is recommended to provide

protection for the RMI and cable.

A good connection should be made to machine ground (star point).

Output stage supplies (+ve, –ve) should not be switched on and off to enable/disable

them as this can cause the over current protection to switch off the output completely.

Ensure that outputs from the RMI do not exceed specified current ratings.

RMI outputs