Garnet Systems Co Ltd GAE3020 Manuel D’Utilisation

 
GARNET                                        GAE-3020 

15 

 
Enabling the DHCP Server 
To enable the DHCP server, a range of IP addresses need to be provided that the 
server can assign to clients. 
The example below shows the commands needed to supply the DHCP server 
with 99 IP addresses from 192.168.219.1 to 192.168.219.99 on the subnet 
192.168.219.0 with the subnet mask of 255.255.255.0.    The maximum lease time 
for each client is set to 86400 seconds, or 1 day.  BOOTP clients may be 
serviced, and requests from unknown clients are allowed. 
The following configuration must be performed for the example: 
•

••

•

•

••

•

 
Disabling the DHCP Server 
To disable the DHCP server, the configuration information previously supplied 
needs to be flushed.    To do so, issue the following commands: 
 
•

••

•

•

••

•