Z Com Inc 0XG950 Manuel D’Utilisation

 

 - 

6

 - 

Chapter 2 Getting Started 

This chapter describes the instructions that guide you through the proper installation of your 

802.11g Wireless LAN PCI Card for the Windows XP/2000/ME/98SE operating systems. 

The complete installation of the 802.11g Wireless LAN PCI Card consists of the following 

steps: 

STEP 1: Insert your Wireless LAN PCI Card into the connector of any free PCI Bus Master 

expansion slot on your desktop computer. 

STEP 2: Install the corresponding driver and utility. 

STEP 3: Set basic settings. 

STEP 4: Finish Installation. 

In addition to the items shipped with the client adapter, you will also need the following in order 

to install the adapter: 

1.  A computer equipped with PCI slot. 

2.  Windows XP/2000/98SE/ME (with a Windows installation CD-ROM, diskettes for use 

during installation). 

3.  Minimum 5 Mbytes free disk space for installing driver and utility program. 

To install the 802.11b Wireless LAN PCI Card, please do the following: 

1.  Open the case of your desktop computer 

2.  Find an available PCI slot on your computer. 

3.  Insert the PCI adapter into the PCI slot. 

4.  Close the case of the computer and start Windows. 

 

CAUTION: Do not force the client adapter into the slot. Forcing it will damage 

both the client adapter and the slot. If the client adapter does not go in easily, 

remove the card and reinsert it.