Справочник Пользователя для Z Com Inc 0XG950
-
6
-
Chapter 2 Getting Started
This chapter describes the instructions that guide you through the proper installation of your
802.11g Wireless LAN PCI Card for the Windows XP/2000/ME/98SE operating systems.
The complete installation of the 802.11g Wireless LAN PCI Card consists of the following
steps:
STEP 1: Insert your Wireless LAN PCI Card into the connector of any free PCI Bus Master
expansion slot on your desktop computer.
STEP 2: Install the corresponding driver and utility.
STEP 3: Set basic settings.
STEP 4: Finish Installation.
2-1 Before Installation
In addition to the items shipped with the client adapter, you will also need the following in order
to install the adapter:
1. A computer equipped with PCI slot.
2. Windows XP/2000/98SE/ME (with a Windows installation CD-ROM, diskettes for use
during installation).
3. Minimum 5 Mbytes free disk space for installing driver and utility program.
2-2 Insert the 802.11g Wireless LAN PCI Card
To install the 802.11b Wireless LAN PCI Card, please do the following:
1. Open the case of your desktop computer
2. Find an available PCI slot on your computer.
3. Insert the PCI adapter into the PCI slot.
4. Close the case of the computer and start Windows.
CAUTION: Do not force the client adapter into the slot. Forcing it will damage
both the client adapter and the slot. If the client adapter does not go in easily,
remove the card and reinsert it.