Z Com Inc ZC3625-55V04 Manuel D’Utilisation
Chapter 3 Hardware Installation
Page 20
injector RJ-45 jack (
P+DATA OUT
);
3.
Connect the power module to the power injector and plug the AC cord into an AC power
receptacle;
4.
After being powered on, the device will send out the beep sound lasting about 1.5
seconds, informing you that the ZC-3625-55-23 is powered up! Wait for about 60
seconds the system will be initialized and start working.
1.
Make sure PoE is correctly connected to the RJ-45 port on the ZC-3625-55-23
labeled PoE+Data, otherwise the extender will be severely damaged!
Warning: