Satel Oy SATEL-TA31 Manuel D’Utilisation
SATELLINE-M3-TR8
SATELLINE-M3-TR9
Integration Guide, Version 1.7
38
ChannelList
SL$D=n
Set channel list default channel, n is
channel number
channel number
“OK" or "ERROR"
ChannelList
SL$E=1
Search free channel
Modem searches for next traffic-free
channel. Listening time of traffic is
Modem searches for next traffic-free
channel. Listening time of traffic is
about 2 seconds
Modem shows next free channel by
activating command again
Modem shows next free channel by
activating command again
"OK" followed by “channel n
is free”
Value of n is channel number
is free”
Value of n is channel number
of next free channel on
channel list
channel list
ChannelList
SL$F?
Get active channel number
decimal number
ChannelList
SL$F=n
Set modem to channel number n in
channel list
channel list
“OK" or "ERROR"
ChannelList
SL$L?nn
Get channel info.
Index nn=[0...(number of channels-1)]
Index nn=[0...(number of channels-1)]
Channel number, Frequency,
Channel width, Tx Power
For example: "CH 1,
869.412500 MHz, 25.0 kHz,
500 mW"
Channel width, Tx Power
For example: "CH 1,
869.412500 MHz, 25.0 kHz,
500 mW"
ChannelList
SL$L=<info>
Set channel info.
Format is
Format is
SL$L=Iaa,Nbbbbbb,Fcccccccccc,Wdd
dddd,Peeeee<CR> or alternatively
SL$L=Iaa,Nbbbbbb,FTccc.cccccc,FRc
cc.cccccc,Wdd.ddd,Peeeee<CR>
where capital letter marks parameter
field and the following decimal
number presents its value.
aa = Index (0...39)
bbbbbb = Channel number (-
dddd,Peeeee<CR> or alternatively
SL$L=Iaa,Nbbbbbb,FTccc.cccccc,FRc
cc.cccccc,Wdd.ddd,Peeeee<CR>
where capital letter marks parameter
field and the following decimal
number presents its value.
aa = Index (0...39)
bbbbbb = Channel number (-
32767...32767)
cccccccccc = Tx/Rx Frequency in MHz
(only numbers or "." allowed, "," is not
allowed)
F field defines a common frequency
value for Tx and Rx
FT field defines Tx frequency
FR field defines Rx frequency
dddddd = Channel spacing/width in
cccccccccc = Tx/Rx Frequency in MHz
(only numbers or "." allowed, "," is not
allowed)
F field defines a common frequency
value for Tx and Rx
FT field defines Tx frequency
FR field defines Rx frequency
dddddd = Channel spacing/width in
kHz (12.5, 20 or 25), trailing decimals
are tolerated e.g. "25", "25.0", "25.00"
and "25.000" are all valid)
eeeee = Transmitter power in mW
(0...35000) (modem rounds the value
to the closest applicable)
Note: 0 means "don't care" value for
power.
<CR> = Carriage return character
are tolerated e.g. "25", "25.0", "25.00"
and "25.000" are all valid)
eeeee = Transmitter power in mW
(0...35000) (modem rounds the value
to the closest applicable)
Note: 0 means "don't care" value for
power.
<CR> = Carriage return character
“OK" or "ERROR"
ChannelList
SL$M?
Get status of channel list. 0 = Not in
use, 1 = Channel list in use
use, 1 = Channel list in use
"0" or "1"
ChannelList
SL$M=n
Set status of channel list. 0 = Not in
use, 1 = Channel list in use
use, 1 = Channel list in use
“OK" or "ERROR"
ChannelList
SL$R?
Get listening time (seconds) of Search
free channel function
free channel function
decimal number
ChannelList
SL$R=n
Set listening time (seconds) of Search
free channel function
“OK" or "ERROR"