Recsol I&C Co. Ltd. RECSPEED-8050E Manuel D’Utilisation
5
2. LED definition
The RECSPEED-8050E, ADSL Bridge/Router has five status LEDs
for diagnostics. You can monitor the LEDs during operation.
Following table shows RECSPEED-8050E ADSL Bridge/Router
status LEDs and identifies what each LED light means.
There are 5 LEDs in front panel of ADSL modem.
for diagnostics. You can monitor the LEDs during operation.
Following table shows RECSPEED-8050E ADSL Bridge/Router
status LEDs and identifies what each LED light means.
There are 5 LEDs in front panel of ADSL modem.
PWR
Dark for power off
Light for power on
Light for power on
ADSL
Flashing slowly for ADSL training in progress
Light for the ADSL link is establish and ready to Transfer data
Light for the ADSL link is establish and ready to Transfer data
PC
Dark for no Ethernet link present of Power off
Light for Ethernet link present
Light for Ethernet link present
RX
Dark for no user data received through the Bridge/Router
Flashing for user data received through the Bridge/Router
Flashing for user data received through the Bridge/Router
TX
Dark for no user data transmitted through the Bridge/Router
Flashing for user data transmitted through the Bridge/Router
Flashing for user data transmitted through the Bridge/Router
3. Real Panel
The rear panel of RECSPEED-8050E ADSL Bridge/Router consist of
power jack, Console Port connector, Ethernet connect and ADSL like
jack as shown below:
power jack, Console Port connector, Ethernet connect and ADSL like
jack as shown below:
4. Right side of cabinet
The power switch is located in the right side of RECSPEED-8050E as
shown below:
shown below:
5. Serial Console Port Setup
The ADSL modem support a console port for setup the configuration
of ADSL modem. You can use any terminal software to communicate
of ADSL modem. You can use any terminal software to communicate
DC 9V Console 10Base-T ADSL
0 1