Recsol I&C Co. Ltd. RECSPEED-8050E Manuel D’Utilisation
7
8. Configuration example : RFC 1483 Bridging Mode
[System configuration]
Ethernet ADSL
Link Link
Link Link
[ISP/DSLAM configuration]
IP address :
192.168.7.3
Subnet mask :
255.255.255.0
Gateway :
None
[Local PC configuration]
IP address :
192.168.7.2
Subnet mask :
255.255.255.0
Gateway :
None
The modem already default to support the RFC 1483. However, you
can use following procedure to reconfigure the modem to support the
RFC 1483 again.
can use following procedure to reconfigure the modem to support the
RFC 1483 again.
For the product with firmware version 1.x.x.x or later(you can get
firmware firmware number by issue ‘system’ command at the root
prompt). The RFC1483 mode only support LLC/SNAP bridged
encapsulation. And this method still be supported in later version for
backward compatibility.
prompt). The RFC1483 mode only support LLC/SNAP bridged
encapsulation. And this method still be supported in later version for
backward compatibility.
" ip device flush
" bridge device add edd
" bridge device add r1483
" r1483 pvc 0/32
" bridge device add edd
" bridge device add r1483
" r1483 pvc 0/32
(you can change 0/32 to any other VPI/VCI value)
" config save
Local PC
192.168.7.2
//r1483
RECSPEED
-8050E
-8050E
192.168.7.1
//r1483
ISP/
DSLAM
192.168.7.3