Hewlett Packard Enterprise AP3750 Manuel D’Utilisation
16
7
Checking the LED Indicators
When the access point is connected to power, LEDs indicate activity as follows:
LEDs
Color
Indicates
Health
Solid green
•
The access point has a valid management link with a wireless
switch.
switch.
•
The access point has booted.
•
The access point has received a valid configuration from a
wireless switch.
wireless switch.
•
At least one radio is enabled or is in sentry mode on the access
point.
point.
Solid amber
The access point is waiting to receive boot instructions and a
configuration file from a wireless switch.
configuration file from a wireless switch.
Alternating green
and amber
and amber
The access point is booting and receiving its configuration file from a
wireless switch.
wireless switch.
Radio 1 (.11b/g)
Radio 2 (.11a)
Radio 2 (.11a)
Solid green
A client is associated with the radio.
Blinking green
Associated client is sending or receiving traffic.
Blinking amber
Non-associated client is sending or receiving traffic.
Alternating green
and amber
and amber
The radio is unable to transmit. This state can occur because of any
of the following:
of the following:
•
Excessive radio interference in the environment is preventing
the radio from sending beacons.
the radio from sending beacons.
•
The radio has failed.
Unlit
The radio is disabled.
If the radio is enabled, no clients are associated with the radio and
there is no traffic activity.
If the radio is enabled, no clients are associated with the radio and
there is no traffic activity.
Radio 2 LED
Health LED
Radio 1 LED
840-9502-0010
TM