Adtran TRC4208 Manuel D’Utilisation
Section 5 User Interface Guide
TRACER 4208 System Manual
42
© 2003 ADTRAN, Inc.
612804208L1-1A
1.
NAVIGATING THE TERMINAL MENU
The TRACER 4208 menu system can be accessed with a VT100 compatible terminal that is connected to
the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and
no parity. Flow control on the serial interface should be configured to
the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and
no parity. Flow control on the serial interface should be configured to
N
ONE
for proper operation. Once a
terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled,
the
the
E
NTER
P
ASSWORD
message displays at the bottom of the TRACER 4208 System Status menu.
Terminal Menu Window
The TRACER 4208 uses a series of menu pages and a single main menu page to access its many features.
The main menu page (see Figure 1) provides a link to all available configuration/status pages.
The main menu page (see Figure 1) provides a link to all available configuration/status pages.
Figure 1. Main Menu Screen
All TRACER 4208 systems are shipped factory default with password protection disabled.
After connecting a VT100 terminal to the TRACER 4208, press <Ctrl + L> to redraw the
current screen.
current screen.