Accton Technology 2555WAG2 Manuel D’Utilisation

SNMP Commands

7-43

7

Global Configuration

• This command enables both authentication failure notifications and 

link-up-down notifications. 

• The snmp-server host command specifies the host device that will receive 

SNMP notifications. 

This command specifies the recipient of an SNMP notification. Use the no form to 
remove the specified host.

snmp-server host <1 | 2 | 3 | 4> <host_ip_address | host_name> 

• 1 - First SNMP host.
• 2 - Second SNMP host.
• 3 - Third SNMP host.
• 4 - Fourth SNMP host.
• host_ip_address - IP of the host (the targeted recipient). 
• host_name - Name of the host. (Range: 1-63 characters)
• community-string - Password-like community string sent with the 

notification operation. Although you can set this string using the 
snmp-server host command by itself, we recommend that you define this 
string using the snmp-server community command prior to using the 
snmp-server host command. (Maximum length: 23 characters)

Host Address: None

 

Community String: public

Global Configuration

Enterprise AP(config)#snmp-server enable server
Enterprise AP(config)#