Accton Technology SMC2552WG2 Manuel D’Utilisation
Command Line Interface
6-42
6
Command Mode
Global Configuration
Example
Related Commands
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
location string.
Syntax
snmp-server location
<text>
no snmp-server location
text
- String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server enable server
This command enables SNMP management access and also enables this device to
send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and
trap messages.
send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and
trap messages.
Syntax
snmp-server enable server
no
no
snmp-server enable server
Default Setting
Enabled
Enterprise AP(config)#snmp-server contact Paul
Enterprise AP(config)#
Enterprise AP(config)#
Enterprise AP(config)#snmp-server location WC-19
Enterprise AP(config)#
Enterprise AP(config)#