Accton Technology SMC2552WG2 Manuel D’Utilisation

Command Line Interface

6-70

6

Use these commands to define MAC authentication on the access point. For local 
MAC authentication, first define the default filtering policy using the address filter 
default command. Then enter the MAC addresses to be filtered, indicating if they are 
allowed or denied. For RADIUS MAC authentication, the MAC addresses and 
filtering policy must be configured on the RADIUS server.

This command sets filtering to allow or deny listed MAC addresses.

 <allowed | denied>

• allowed - Only MAC addresses entered as “denied” in the address filtering 

table are denied.

• denied - Only MAC addresses entered as “allowed” in the address filtering 

table are allowed.

allowed

Global Configuration

address filter default

Sets filtering to allow or deny listed addresses

GC

address filter entry

Enters a MAC address in the filter table

GC

address filter delete

Removes a MAC address from the filter table

GC

mac- authentication server Sets address filtering to be performed with local or 

remote options

GC

mac- authentication 

session-timeout

Sets the interval at which associated clients will be 

re-authenticated with the RADIUS server authentication 

database

GC

show authentication

Shows all 802.1X authentication settings, as well as the 

address filter table

Exec

Enterprise AP(config)#address filter default denied
Enterprise AP(config)#