Accton Technology SMC2552WG2 Manuel D’Utilisation
Command Line Interface
6-96
6
speed
This command configures the maximum data rate at which the access point
transmits unicast packets.
transmits unicast packets.
Syntax
speed
<speed>
speed
- Maximum access speed allowed for wireless clients.
(Options for 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps)
Default Setting
54 Mbps
Command Mode
Interface Configuration (Wireless)
Command Usage
• The maximum transmission distance is affected by the data rate. The lower
the data rate, the longer the transmission distance. Please refer to the table
for maximum distances on page C-5.
for maximum distances on page C-5.
Example
multicast-data-rate
This command configures the maximum data rate at which the access point
transmits multicast and management packets (excluding beacon packets) on the
wireless interface.
transmits multicast and management packets (excluding beacon packets) on the
wireless interface.
Syntax
multicast-data-rate
<speed>
speed
- Maximum transmit speed allowed for multicast data.
(Options for 802.11b/g; 1, 2, 5.5, 11 Mbps)
Default Setting
1 Mbps for 802.11b/g
Command Mode
Interface Configuration (Wireless)
Example
Enterprise AP(if-wireless g)#speed 6
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g)#multicast-data-rate 5.5
Enterprise AP(if-wireless g)#
Enterprise AP(if-wireless g)#