Accton Technology SMC2552WG2 Manuel D’Utilisation

Wireless Interface Commands

6-97

6

This command configures the radio channel through which the access point 
communicates with wireless clients. 

 <channel | auto>

• channel - Manually sets the radio channel used for communications with 

wireless clients. (Range for 802.11b/g: 1 to 11)

• auto - Automatically selects an unoccupied channel (if available). 

Otherwise, the lowest channel is selected.

Automatic channel selection 

Interface Configuration (Wireless)

• The available channel settings are limited by local regulations, which 

determine the number of channels that are available. 

• When multiple access points are deployed in the same area, be sure to 

choose a channel separated by at least five channels for 802.11b/g. You 
can deploy up to three access points for 802.11b/g (e.g., channels 1, 6, 11).

• For most wireless adapters, the channel for wireless clients is automatically 

set to the same as that used by the access point to which it is linked.

This command adjusts the power of the radio signals transmitted from the access 
point.

 <signal-strength>

 - Signal strength transmitted from the access point. 

(Options: full, half, quarter, eighth, min)

Enterprise AP(if-wireless g)#channel 1
Enterprise AP(if-wireless g)#