Robotron Pty Ltd G5E Manuel D’Utilisation
WiNRADiO G3XX VHF/UHF Receiver
10
Hardware Installation
G3XXi model (PCI card)
1. Turn the computer off and disconnect the power cord.
2. Remove the computer case. Choose an empty PCI slot, as far as possible
from the power supply and from other cards.
3. First touch the computer metalwork with your hand to drain any static
charge, then carefully insert the card into the vacant slot and push down
until it is firmly seated. Screw the metal bracket at the end of the card to
the computer case. (This must be done to provide proper grounding for the
card).
until it is firmly seated. Screw the metal bracket at the end of the card to
the computer case. (This must be done to provide proper grounding for the
card).
4. Replace the computer case and reconnect the power cord.
5. Connect the supplied audio lead between the receiver output (a standard
audio jack) and the sound card Line Input. (If there is no Line input on your
PC, as is the case with some laptops, you may use alternative inputs, such
as the Microphone input.) Or, if you prefer, you can connect the receiver
directly to an amplified speaker or other suitable audio equipment.
PC, as is the case with some laptops, you may use alternative inputs, such
as the Microphone input.) Or, if you prefer, you can connect the receiver
directly to an amplified speaker or other suitable audio equipment.
G3XXe model (external model)
1.
Connect the receiver to the USB port.
2.
Connect the supplied power adapter to the power outlet on one side and
the power lead to the receiver on the other side.
the power lead to the receiver on the other side.
3.
Turn the receiver on using the power switch at front of the receiver. The
blue LED will first flash slowly, indicating that the receiver is ready. (The
flashing pattern of the blue LED has diagnostic meaning. For more
details, see Appendix J, USB Interface Diagnostics.)
blue LED will first flash slowly, indicating that the receiver is ready. (The
flashing pattern of the blue LED has diagnostic meaning. For more
details, see Appendix J, USB Interface Diagnostics.)