Robotron Pty Ltd G5E Manuel D’Utilisation

Page de 87
WiNRADiO G3XX User’s Manual
 
Connecting the Antenna 
Unless you already have a proper antenna in place, you might like to take 
advantage of the supplied start-up antenna which comes with your G3XX 
receiver. 
This antenna consists of a 3-metre length of a coaxial lead-in cable, with an 
additional 3 metres of insulated wire. The thinner, insulated wire at the end of 
the coaxial cable is the actual antenna.  It is necessary for the lead-in cable to 
be as far away from the PC as possible, to reduce potential interference from 
the PC.  
Please note that this start-up antenna is supplied for initial tests and immediate 
gratification
 only. It is not intended to replace a proper antenna. 
The best placement of the start-up antenna depends on your actual situation, 
and will often involve some experimentation.  However, the basic rule is 
simple: Place the antenna as close to the window as you can, and keep the 
active part of the antenna as far away from the PC, and other electronic and 
electrical devices, and metal objects, as possible.   
 
 
 
An example of start-up antenna placement 
No matter how good a radio receiver is, the performance of the entire receiving 
system will depend on the quality of the antenna. The same applies to a 
WiNRADiO receiver. To make the most of your G3XX receiver, you should 
install a proper antenna. WiNRADiO may also be able to assist with our wide 
range of suitable antennas – check our Web page www.winradio.com
 
 
13