Fujitsu Technology Solutions GmbH WLAN-D1705 Manuel D’Utilisation
Wireless
LAN
A26391-K140-Z130-1-8N19
English - 11
The next step you can make is to assign a name in the Description
(optional) field as a description for the network you are currently setting up.
This is very useful, to distinguish between several different networks. You
must then select the type of connection in the Network type field. If you want
to connect to an access point, you must select Access point (infrastructure
mode). If you want to connect to another system, e.g. a PC, you must
select Peer-to-peer (ad hoc mode). If you select Peer-to-peer, in the next field
you must select the same wireless channel as is set on the other WLAN
component. Only channels 1 through 13 are possible.
Before you can now make a connection, you must select an association
mode in the Association mode field. The association options available
depend on the hardware of your access point or your WLAN component.
(optional) field as a description for the network you are currently setting up.
This is very useful, to distinguish between several different networks. You
must then select the type of connection in the Network type field. If you want
to connect to an access point, you must select Access point (infrastructure
mode). If you want to connect to another system, e.g. a PC, you must
select Peer-to-peer (ad hoc mode). If you select Peer-to-peer, in the next field
you must select the same wireless channel as is set on the other WLAN
component. Only channels 1 through 13 are possible.
Before you can now make a connection, you must select an association
mode in the Association mode field. The association options available
depend on the hardware of your access point or your WLAN component.
i
Inform yourself about the configuration of the WLAN
components to which you want to make a connection and then
make the following settings in the Odyssey client accordingly.
components to which you want to make a connection and then
make the following settings in the Odyssey client accordingly.
You can chose one of three association modes: Open, Shared or WPA.
After selecting the association mode, you must specify a suitable
encryption method in the Encryption method field.
The encryption selection also depends on the conditions of your access
point or your WLAN component. Your selection options differ in
accordance with the selected association mode.
You have the following options: none, WEP, TKIP or AES.
With certain combinations, you have to input a key in the last section of the
configuration window. You can get this information from the operating
instructions of the remote station or from the configuration status. If you
have to input a WEP key, you must also note the Format for entering keys
selection field. With this type of encryption the system also distinguishes
according to the key format. You can select either ASCII characters or
hexadecimal digits.
After selecting the association mode, you must specify a suitable
encryption method in the Encryption method field.
The encryption selection also depends on the conditions of your access
point or your WLAN component. Your selection options differ in
accordance with the selected association mode.
You have the following options: none, WEP, TKIP or AES.
With certain combinations, you have to input a key in the last section of the
configuration window. You can get this information from the operating
instructions of the remote station or from the configuration status. If you
have to input a WEP key, you must also note the Format for entering keys
selection field. With this type of encryption the system also distinguishes
according to the key format. You can select either ASCII characters or
hexadecimal digits.
i
Connection setup can only be completed successfully if the
components to be connected are set identically.
components to be connected are set identically.
!
For security reasons, we recommend that you set encryption
for your wireless networks.
for your wireless networks.