ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation
Chapter 11 Wireless LAN
EMG2926-Q10A User’s Guide
105
11.7 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN 2.4G/5G > QoS. The following screen appears.
Figure 67
Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
11.8 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
status. To open this screen, click Network > Wireless LAN 2.4G/5G > WPS.
Note: With WPS, wireless clients can only connect to the wireless network using the first
SSID on the EMG2926-Q10A.
Table 40
Network > Wireless LAN 2.4G/5G > QoS
LABEL
DESCRIPTION
WMM QoS
Select Enable to have the EMG2926-Q10A automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
This field is not configurable and the EMG2926-Q10A automatically enables WMM QoS
if you select 802.11n, 802.11an, 802.11gn, 802.11bgn or 802.11ac in the
Wireless LAN 24G/5G > General screen.
if you select 802.11n, 802.11an, 802.11gn, 802.11bgn or 802.11ac in the
Wireless LAN 24G/5G > General screen.
Apply
Click Apply to save your changes to the EMG2926-Q10A.
Cancel
Click Cancel to reload the previous configuration for this screen.